Figure 1: A Door in the clamps (Big iron Besse ones!)
So … the doors are going together – but I’m doing the bottom ones first (using the birch panel inserts instead of the glass inserts that will go into the top cabinet panels). Before I could get to the glue-up shown in figure 1, I ran the frame parts over the table saw (to cut them to length and to put the panel dado grooves into the edges of them), and then I ran the frame parts over the router (to put the biscuit mortises (grooves) into the ends of them. I had previously used the router to put an ogee style inner profile on all of the frame parts.
Woodworking Miscellany 